Everything Else

How To: Make your own clay

Put your imagination into solid form by working with clay. Now all you need is the clay. No need to buy it at the store when you can make all the clay you like at home. Clay is a fun medium for adults and kids to work in.

How To: Sharpen a convex wood carving knife

This video teaches the secrets to sharpen a convex wood carving knife in simple steps. First find out how dull your knife is by cutting a paper or shaving hair on you hands. Now take a sand paper attached to a pad and start sharpening the ends by applying less pressure. Now try the sharpness of the knife, it will be better. Now take a double sided strop with sharpening compound and start rubbing the knife edge. After sharpening try the knife again, it should be good enough.

How To: Sculpt & carve fake teeth from soap

Need a use for a model tooth? Learn with this "Tooth Carving 101" tutorial how to carve a fake tooth from a bar of soap. One will need a small carving knife, a bar of soap and about thirty minutes. Your fake tooth with make for one heck of peculiar mantel piece.

How To: Make mid-century inspired wall art with aluminum cans

ThreadBanger's Decor It Yourself shows how to made mid-century mod inspired wall art out of your leftover aluminum cans. Talk about a great way to recycle! Be good to the environment, while creating a three-dimensional metal sculpture to decorate your wall with a little soldering, cutting, and gluing. In the second half of this tutorial, learn how to make a mid-century geometric wall installation to dress up an empty wall.

How To: Make contemporary installation art

Each & Every One of You (EEOOY) is a mock TV show pilot that teaches ordinary people how to make contemporary installation art. If these words strike fear into your heart or make you cringe with memories of seeing contemporary art and wondering what the hell it was all about, this show is for you!

How To: Make a silicone face with Gel-10 & Polyfoam

Attention aspiring horror movie makers! Have an interest in making fake heads to use as your gory extras? BITY Mold Supply has supplied the world with this great tutorial on how to cast a silicone head or face from Gel-10 and Polyfoam. In the later half of this video, BITY lends great tips on how to paint your finished silicone face for a realistic look.

How To: Make a fiberglass mold

This how-to video series is a step-by-step guide to molding fiberglass. These videos give a simple introduction to fiberglass mold construction, explained using a model aircraft cowling but the same technique applies to any fiberglass sculpture. The entire process is detailed from plug, to mold, to finished fiberglass part. Follow along with the eight steps: develop the plug, construct the parting board, lay up the mold, release the mold from the plug, prepare the mold for fabrication, lay up...

How To: Make a bowl out of a record

Trying to find a new use for old, scratched vinyl? This easy do-it-yourself project shows how to turn a record into a decorative bowl; just follow along with the step-by-step instructions in this video. You will need a record, an oven, a pot (unless you want to free-hand mold the record), and some cold water. Check out this simple craft sculpting project and learn how to make a bowl out of a record, but remember not to eat soup out of it.

How To: Sculpt a baby monkey out of polymer clay

Witness this step by step photo presentation of sculpting a mini monkey from polymer clay by Judy Dickinson. Bake the individual pieces of the face and body wrapped in aluminum foil. Delicately sculpt the monkey's arms and legs, leaving ball joints to sew on a fabric body. When the monkey pieces are done baking, paint it and sew a little outfit for your cute baby monkey doll.

How To: Make a silicone mold

Watch this instructional video to make a one part silicone mold. Silicone molding is a simple and accurate process and will forgive many mistakes. You can actually smooth the silicone onto your object as it dries.

How To: Make a mold of a sculpture

This three part instructional sculpture video demonstrates how to make a two part plaster mold. Make a plaster mold to make stop-motion animation puppets from clay models. A plaster mold can make casts out of almost any material. This model will be cast out of foam rubber with a movable metal skeleton.

How To: Make an epoxy face mask

Sure, epoxy is poisonous if ingested, an eye irritant, and probably carcinogenic, but you can still make a mask out of it anyway. The flexible quality of epoxy, allows to make an exact mold of your, or any desired face. Watch this video sculpting tutorial and learn how to make an epoxy face mask.

How To: Cast an RTV mold

This animation shows the various steps taken when creating an RTV mold. First, risers are put on the part to allow air to escape from the final mold. A thin film is attached to the part, which will act as a seam for the final mold. A box is built around the entire structure, and it is filled with silicone rubber. Once the rubber has cured, the box and risers are removed, the mold is opened at its seam, and the original part is removed. Any type of urethane can now be injected in the mold to c...

How To: Use sculpture tools

Sculpture, like many art forms, requires a variety of tools. Learn about the different types of sculpting tools with tips from an expert on working with plaster sculptures in this free art lesson video series.

How To: Sculpt dancer figurines

Looking for a sculpting project but don't know where to begin? Try this easy online art lesson where you'll learn to sculpt dancer figurines. Learn about detail, body positioning and more from expert sculptor Jorge Benlloch.

How To: Make a cat sculpture

Looking for a fun sculpture project? Why not make your self a cat! In this free online art lesson on video, learn how to make a clay cat sculpture from expert Jorge Benlloch, including tips on shape, details, tools and more.

How To: Sculpt a bust

Sculpt a bust from clay in just a few easy steps! From initial materials you'll need to finishing your final sculpture, it's all right here in this free video series about art taught by expert sculptor Jorge Benlloch.

How To: Sculpt a clay eagle

Need a new sculpting project? Why not watch this video and make a clay sculpture of an eagle! Learn everything you need to know from materials to finishing your piece from expert sculptor Jorge Benlloch.

How To: Sculpt baby feet

This unique instructional slide show will show you how to sculpt tiny, delicate baby feet out of polymer clay. You will need polymer clay, sculpting tools, a paintbrush, and blush makeup. These guidelines can be used for sculpting baby feet on clay dolls. Polymer clay hardens in the oven, so it is convenient to sculpt baby feet at home.

How To: Sculpt a pig in polymer clay

This video sculpting tutorial shows a high speed version of the process for building a pig out of clay. Beginning with an aluminum foil skeleton, pink polymer clay is slowly added on, molded, and finished to create a realistic looking pig. Watch this video sculpting tutorial and learn how to make a pig figurine out of polymer clay.