How-To Guides about Sculpture

OK. The best thing to make a snow man look good is to make it as big as you can.  To see how much your party can make the snow man or bear start by rolling a snow ball into the biggest you can and can still lift it.  Then make a bigger one that you can just roll (the base).  Now that you have the base, lift the snow ball that you made that your party has to lift.  And after you have done that put a head on that is the smallest ball on the whole snowman.  Now that you have a "BLANK" snowman you...

Hold the repulsion- we're talking art, not lice. Seattle artist Adrienne Antonson makes tiny insect sculptures with recycled human hair and glue, and they're pretty spectacular.

In this tutorial, we learn how to sharpen your chisel inexpensively. This is an art you have to learn if you are going to have to learn to work with tools. To start, you will first need to lay down a piece of paper down on a block of wood. After this, lay a piece of grit down on top of the and grab your chisel. Spray the grit with some water and then use the bevel on the chisel to move it around. Use your body to move the chisel, not just your hands. Continue to do this around the sides until...

In this video, we learn how to recycle plastic bottles to make hanging art. First, cut the bottom off of the bottle and then cut it in half. Then, cut the other end off of the bottle as well. After this, you can grab the bottle and start to paint your choice of color all over it. Use different colors and transition and blend with them. Lay these on one side to dry when you are finished. When you're done with these and they are completely dry, you can use them to decorate around your house. This...

Spice up your next party with some unique party dishes, and we're not talking about food here, we're talking about the actual dishes, specifically bowls. But not just any bowls, vinyl bowls, made from authentic vinyl records. The steps are simple: melt the vinyl record in the oven, then take it out and mold it (safely) into a plastic bowl. Change the shape up each time!

Apparently IKEA does not sell matches or lighters, so Helmut Smits was forced to improvise. Titled FLAMMA, this conceptual art piece is outdoor survivalism for the resourceful yuppie set.

If you're looking for ideas for creepy decorations to make for your next Halloween party, or just want to have a little fun, you can use papier mache, cardbord paper, a little foil and some paint to create a surreal cartoon hand.

In this tutorial, we learn how to make a silicone mold of a toy figurine. First, roll out clay and press the bottom of the figurine into the center. Next, use a plastic bottle to create the mold box. Cut the bottom off of the bottle, then press the bottle into the clay to make sure the figurine is centered. Now, press the bottle down into the clay and make the silicone mixture. When you're done mixing, pour it into the bottle. Pour in a stream to avoid any bubbles inside of it. Let this sit...

In this tutorial, we learn how to make a simple silicone mold. You will first need a silicone base, which is an off white liquid. You will also need the hardener, a thickener, and a thinner. To build the mold, cut a paper cup in half, then fill the container with rice. Measure the amount of rice in the cup so you know how much silicone needs to go into the mold. After this weigh your ingredients for the silicone, then mix them and pour into the mold. When the mold is finished hardening, use it...

In this tutorial, we learn how to make a paper mache baby elephant. To begin, you will need a pattern, which you can find at Ultimate Paper Mache. There is a grid on the pattern that you can use to expand onto a large piece of particle board. This will give you the entire body for the elephant. After you cut the elephant out of the board, glue and nail it together with spacers in between the body parts. After this, crumple up newspaper and then tape and squish it onto the wood until the muscles...

Ray Charles created music in the dark (literally), but somehow we doubt you'd be able to create the same magic while attempting to mold polymer clay in the dark.

Learn how to sculpt a miniature churro charms out of polymer clay with this free video art lesson. While this tutorial is best suited for those with some familiarity of polymer clay sculpture, novice sculpters should be able to follow along given a little effort. For specifics, including step-by-step instructions, and to get started crafting your own mini polymer clay churro charms, watch this sculpture tutorial.

Everyone loves that big green ogre, and with the new release of Shrek 4 upon us, why not make some art to commemorate the occasion?

In this video we learn to make fondant flip flops to decorate cakes. Grab your fondant and mix in your various colors. You can have as many colors as you want but should have at least two. Roll out your first color to your desired thickness. Use a butterfly cookie cutter to cut out a butterfly. Use a sharp knife and cut out the center of the butterfly so you have the seperate wings. Curve the edges so they are nice and smooth. These are the bottoms of your flip flops. Then take a small piece of...

If you would like to create the look of stitches or sutures on your clay sculptures, you will need the following: clay, a toothpick or sharp implement, and a cutting tool.

This is a video tutorial describing how to construct a mini loofah for your dollhouse. The first step is to gather your supplies. You will need a needle, scissors, thread, and tulle. The tulle and the thread should be the same color. Next your tulle should be cut to be 1.5 feet long. Then bunch up the tulle so that it is small and compact just like a loofah. Next you should thread your needle. Next sew the tulle so that it stays in the shape that you would like it to be in. Finally cut off all...

In order to make a gum paste anemone you first should roll out the gum paste onto a flat surface and cut out about 13 circles of this with a cookie cutter. Use thin foam and ruffle 12 of the petals leaving the last flat. Place your ruffled petal on thick foam and drag a ball tool over the bottom half of the petal. This will give it an oval shape. Now, put these into a flower former. Now let the 13th petal that is flat down to dry. Let these dry for about 2-6 hours but not until they are rock...

Garden of Imagination describes how to make a miniature candy bar for a doll house. First find a photo of the type of candy bar you want online. Once you find the image you want right click the icon and select "copy". Open a new MS Word document and paste into it. It should be too big so right click the picture and go to hyperlink in the menu that pops up. If the picture has a hyperlink remove it so you can adjust the size. Once the hyperlink is removed click on the picture and boxes should...

How to Sculpt a Sitting Body out of Clay

First of all take the clay and make a roll. Now keep rolling to form a roll that has one end large and the other end smaller at the tip. Now bend the roll upwards from the middle. Now take a match stick. Now use this to make a hole to make the mouth. Use to fingers to make the corners of the mouth round in shape. Make the mouth wide and open. Now make the eyes by using a matchstick to pierce the sockets. Now take a little clay and then make a roll of it. Now make a leg out of it by making the...

In this two part video you'll learn the complete process for casting duplicates of a miniature figure. How to make the rubber mold in two parts and how to cast the miniature duplicate. A two part mold is the kind of rubber mold you make for complex minis like figures, warriors, wizards, dwarves etc. You'll learn everything you need, and exactly what to do to duplicate your own miniature fantasy characters.

Mosaics are a cool type of art. You can use mosaics to liven up your home or garden and they are cheap and fun to make. Check out this video for tips and instructions for making mosaics.You Will Need • Fiberboard • Pencil • Ceramic and glass • Adhesive glue • Strips of wood or metal • Rubber spatula • Grouting powder • Water • Rubber gloves • A clean, damp cloth • Copy machine (optional) • Tracing paper (optional) • Hammer (optional) • Goggles (optional)

Ducttapestuff presents colored duct tape that he uses in making a variety of objects like wallets, book bags and flowers. He strongly recommends duct tape made by "Duck", which is the only kind of tape he uses and he considers it the best. He shows all the tape he has (some of which were freshly bought when the video was made): a wide range of colored tape, from beige to black, and also a few patterned tape like "tree camouflage" or "cosmic tie-dye". He says that he always gets his tape from...

In this video you get to watch a talented mache artist make a fishwichwich from paper mache. It is fast paste but you get the idea of how he does it. Starting with the paper mache materials, the paste and paper, he makes the body and head in several pieces. He pastes these together and uses some sort of stick to make its spikes. He covers the spikes with mache so they have a more realistic look and starts to smooth out the features of the fish. Once the body is done, he's got the teeth and some...

This video teaches the secrets to sharpen a convex wood carving knife in simple steps. First find out how dull your knife is by cutting a paper or shaving hair on you hands. Now take a sand paper attached to a pad and start sharpening the ends by applying less pressure. Now try the sharpness of the knife, it will be better. Now take a double sided strop with sharpening compound and start rubbing the knife edge. After sharpening try the knife again, it should be good enough.

Need a use for a model tooth? Learn with this "Tooth Carving 101" tutorial how to carve a fake tooth from a bar of soap. One will need a small carving knife, a bar of soap and about thirty minutes. Your fake tooth with make for one heck of peculiar mantel piece.

ThreadBanger's Decor It Yourself shows how to made mid-century mod inspired wall art out of your leftover aluminum cans. Talk about a great way to recycle! Be good to the environment, while creating a three-dimensional metal sculpture to decorate your wall with a little soldering, cutting, and gluing. In the second half of this tutorial, learn how to make a mid-century geometric wall installation to dress up an empty wall.

Each & Every One of You (EEOOY) is a mock TV show pilot that teaches ordinary people how to make contemporary installation art. If these words strike fear into your heart or make you cringe with memories of seeing contemporary art and wondering what the hell it was all about, this show is for you!

Make some mini cement art!

Don't toss that old LP! A few minutes in the oven and you can have a bowl that will be a real conversation piece. Watch this video to learn how to turn a used vinyl record into a bowl.

This is the video showing you how to carve an apple into a edible duck fruit carving! Fruit carving edible arrangements is very popular in Asia and now, weddings in America.

This video demonstrates the usefulness of the aluminum welding ice carving technique. The technique allows carvers to easily "Get Outside the Block" and create sculptures that are hardly limited by the dimensions of the ice block.

This how-to video series is a step-by-step guide to molding fiberglass. These videos give a simple introduction to fiberglass mold construction, explained using a model aircraft cowling but the same technique applies to any fiberglass sculpture. The entire process is detailed from plug, to mold, to finished fiberglass part. Follow along with the eight steps: develop the plug, construct the parting board, lay up the mold, release the mold from the plug, prepare the mold for fabrication, lay...

Trying to find a new use for old, scratched vinyl? This easy do-it-yourself project shows how to turn a record into a decorative bowl; just follow along with the step-by-step instructions in this video. You will need a record, an oven, a pot (unless you want to free-hand mold the record), and some cold water. Check out this simple craft sculpting project and learn how to make a bowl out of a record, but remember not to eat soup out of it.

Add leaves and patterns to your mold! This how-to video shows you a way to create an organic design in your molds. Watch this video sculpture tutorial and learn how to design tile molds with leaf and different pattern imprints.

Watch this instructional video to make a one part silicone mold. Silicone molding is a simple and accurate process and will forgive many mistakes. You can actually smooth the silicone onto your object as it dries.